This machine is designed to use a double knife drive arms system which has an advantage of high speed, accurate, consistent and durable.
| MODEL | CT-185E | CT-260E | CT-300E |
|---|---|---|---|
| mm ( inches ) | mm ( inches ) | mm ( inches ) | |
| A Cutting Width | 1850 ( 72.8 ) | 2600 ( 102.4 ) | 3000 ( 118.1 ) |
| B Cutting Height | 165 ( 63 ) | 165 ( 63 ) | 165 ( 63 ) |
| C Cutting Length | 1850 ( 72.8 ) | 2600 ( 102.4 ) | 3000 ( 118.1 ) |
| D Front Table Length | 750 ( 29.5 ) | 750 ( 29.5 ) | 750 ( 29.5 ) |
| E Table Height | 900 ( 35.4 ) | 900 ( 35.4 ) | 900 ( 35.4 ) |
| F Machine Width | 3580 ( 140.9 ) | 4230 ( 166.5 ) | 4630 ( 182.3 ) |
| G Machine Height | 1780 ( 70 ) | 1780 ( 70 ) | 1780 ( 70 ) |
| H Machine Length | 3380 ( 133.1 ) | 4030 ( 158.7 ) | 4430 ( 174.4 ) |
| K Machine Front Length | 890 ( 35 ) | 890 ( 35 ) | 890 ( 35 ) |
| Smallest Cut-with clamp | 120 ( 4.7 ) | 120 ( 4.7 ) | 120 ( 4.7 ) | without clamp | 40 ( 1.6 ) | 40 ( 1.6 ) | 40 ( 1.6 ) |
| Cutting Cycle Per Minute | 36 | 36 | 36 |
| Clamp Pressure | 400 - 6000 kg ( 880 - 13200 Ib ) | 400 - 6000 kg ( 880 - 13200 Ib ) | 400 - 6000 kg ( 880 - 13200 Ib ) |
| Net Weight | 6900 kg | 9500 kg | 11500 kg |
| Power Requirement | 14.75 kw ( 19.67 HP ) | 20.25 kw ( 27 HP ) | 24.5 kw ( 32.7 HP ) |
※ Specifi cation could be changed for improvement without prior notice.
This machine is designed to use a double knife drive arms system which has an advantage of high speed, accurate, consistent and durable.
Accuracy ±0.01m/m Tolerance 0.02m/m High speed and efficiency of location and shif.
Backgauge positioning is controlled by a high speed micro computer. lt works together with a precise Servo motor to drive the backgauge. User friendly cutting program set up, high speed motion between positions, large memory capacity, high accuracy backgauge positioning, multi automatic function for repeating pattern cutting (label cutting); all these advantages make a Chun Tien Paper Cutter the Right solution to today`s high flexibility demands on all printing jobs.
Put by the operathing panel, so the operator could watch the pressure level and pressure regulation easily.
